• Product API 2012.22.2
• Nokia Connectivity Cable USB Driver Version 7.1.78.0
• Flash Update Package 2012.11
• FUSE Connection Manager v 2012.22
• Envira CL 2012.16
MAIN CHANGES & ERROR CORRECTIONS FROM PREVIOUS VERSION 2012.16.4.48159
Error Corrections & changes:
New product: RM-884
Please note:
Energy Management Calibration should not be performed for products
using the “Quantum” engine (RM-689, RM-702, RM-704 and other product
using the same engine)
EM calibration improved
Multiflashing problem (Genius case 186053) solved
RM-653 settings added
In case of problems with flashing update Programming Device (Flashing->Prommer Maintenance->Update)
Microsoft DOT.NET version 2 Service Pack 2 is now the minimum
requirement. Phoenix installation will check PC for the DOT.NET version
and update it automatically when PC has online connection. Without
online connection, old DOT.NET versions must be updated manually.
New common data package location in use. Please see document SR1315 in KICS Information Center for further information.
All Nokia Service Software Applications will use following location for product specific data:
- Windows XP: C:\Documents and Settings\All Users\Application Data\Nokia\Packages
- Windows 7: C:\Program Data\Nokia\Packages
Please see articles SR1774 for more information on the use of Nokia
Data Package manager – tool, and article SR1854 for more information on
the Nokia Service Application Manager Tool.
During installation, Data Packages should be installed in these
directories, if they install to any other location by default. target
folder for local data packages can be changed in the installation wizard
manually
This version contains the latest Tucson components. Therefore it is not necessary to use Tucson Add-On Installation Packages
Before you start Phoenix or Care Suite installation to Windows 7 the
User Account Control (UAC) should be turned off from Windows Control
Panel settings.
For more information concerning new options in “Firmware Update” – menu
and their use, Please see documents SR1313 and SR1659 in KICS
Information Center.
Tucson operations combined with “flash” – option are now handled in the
same way as “refurbishment”, which requires Mass Memory Content File to
be available.
Use of Flash option simultaneously with product code change for USB Only
phones is restricted. It is recommended to flash phone separately with
Firmware Update. Please refer to product specific instructions.
Connection media to FLS-5 must be configured to be “USB_FBUS”, after
FLS-4 support has been removed FBUS does not work anymore with FLS-5
KNOWN ERRORS & LIMITATIONS
• N9- RM-696 Product Code change still unreliable
• FLS-5 drivers do not support 64 bit OS, so phones using FLS-5
/USB_FBUS connection can not be serviced in 64 bit operating systems
• Software downgrade with Tucson system is only possible for BB 5.0 products supporting the Data Package 2 concept.
• Flashing with setup FLS-5, SS-46 and product specific adapter is not
supported anymore. FLS-5 can be used with other product specific cables
and adapters, but not with SS-46 Interface Adapter.
• If you install old DCT-4 data packages, Flash Update Package File
installation path may be wrong. This is caused by very old DCT-4 data
packages which contain Flash Update Package and overwrite current
information during installation. If you experience problems when
updating FPS-x prommers, please check that Phoenix “Prommer maintenance”
is looking for the files from the correct location which is
“C:\Program Files\Common Files\Nokia\Tss\Flash”. If not, Phoenix will
show error “Update via ini – file failed”. In this case, select
“Update” from that Phoenix “Prommer maintenance” – UI, browse to
correct directory and select “fpsxupd.ini” for all other prommers
except the FPS-8.
• FPS-21 flashing for RX-51 works only with TCPIP connection. FPS-21
prommer with new HW version 11 has been released to correct this. Sales
pack code is 0089J83 , old HW version is not delivered anymore
• Please refer to product specific documents and instructions concerning the limitations of the RX-51 product
• When version 2010_12_8_42304 or newer with FUSE connection manager is
installed on top of older Phoenix versions, there may be an additional
delay of several minutes when you start Phoenix for the first time.
Please wait patiently; Phoenix will start after configuration is
finished.
• When using Data Package download functions with online connection,
download times may occasionally be long. This is not caused by Phoenix
(or Care Suite). The download speed from online servers is occasionally
is known to be slow, depending on how data is buffered on caching
servers.
• After you close Phoenix, it may not restart. To rectify this:
- Use Windows Task Manager to manually shut down phoenix.exe and FuseService.exe processes, or optionally restart your PC
• It is not possible to program Mass Media Content file to some devices
over direct USB cable connection, due to the large size of the file.
For these models a feature called “Media Check” has been implemented.
When this type of product is connected to service software / PC via
direct USB cable the refurbishment option will be disabled. Please use a
flash prommer. Affected products using Media Check are: RM-122,
RM-175, RM-176, RM-186, RM-246, RM-247, RM-296, RM-297, RM-320, RM-462,
RM-472, RM-484, RM-505, RM-555, RM-559
• To be able to use the help files in Windows 7 you need to install
Windows Help program (WinHlp32.exe) for Windows 7. Ways to locate
WinHlp32.exe:
- Start Phoenix with online connection to Internet, select “Help” and
“Phoenix help”. Click the “Microsoft Help and Support” website link.
Download WinHlp32 and install it.- Go to Business Technology, Downloads
• When using flash prommers, only one connection type to one prommer is
allowed. Please use either NFPD USB or NFPD TCPIP connection to one
prommer, not both connections to same prommer
Supported operating systems and user rights
• Windows XP Service Pack 1 or higher
• When installing Phoenix into Win XP you must have local admin rights.
• When using in Win XP, user must have power user rights.
• Windows 7 32 Bit version
• Windows 7 64 Bit version (Please note that FLS-5 drivers do not
support Win 7 64 bit OS, therefore FLS-5 can not be used in this
operating system)
Download here :
- Depositfiles.com
- 2Shared.com
- Uploaded.to
- Load.to
